Aggregator

A vulnerability identified as problematic has been detected in Juniper Junos Space. This affects an unknown part. This manipulation of the argument list filter causes cross site scripting. This vulnerability appears as CVE-2026-21904. The attack may be initiated remotely. There is no available exploit. You should upgrade the affected component.

A vulnerability categorized as problematic has been discovered in OpenClaw up to 2026.3.24. Affected by this issue is some unknown functionality of the component Webhook Endpoint. The manipulation results in improper restriction of excessive authentication attempts. This vulnerability is reported as CVE-2026-35623. The attack can be launched remotely. No exploit exists. It is advisable to upgrade the affected component.

A vulnerability was found in Juniper Junos OS up to 23.4R2-S6/24.2R2-S3 on EX4100. It has been rated as problematic. Affected by this vulnerability is an unknown functionality of the component IRB Interface. The manipulation leads to incorrect initialization of resource. This vulnerability is documented as CVE-2026-33773. The attack can be initiated remotely. There is not any exploit available. Upgrading the affected component is advised.

A vulnerability was found in Juniper Junos OS up to 24.4R1-S3/24.4R1. It has been declared as problematic. Affected is an unknown function of the component CLI Command Handler. Executing a manipulation can lead to improper check for unusual conditions. This vulnerability is registered as CVE-2026-33786. The attack needs to be launched locally. No exploit is available. It is recommended to upgrade the affected component.

A vulnerability was found in Juniper Junos OS and Junos OS Evolved. It has been classified as critical. This impacts an unknown function of the component CLI Handler. Performing a manipulation results in os command injection. This vulnerability is cataloged as CVE-2026-33791. The attack must be initiated from a local position. There is no exploit available. Upgrading the affected component is recommended.

A vulnerability was found in Juniper Junos OS up to 22.4R3-S0/23.2R1/23.4R1 on MX and classified as problematic. This affects an unknown function. Such manipulation leads to memory leak. This vulnerability is listed as CVE-2026-33782. The attack must be carried out from within the local network. There is no available exploit. It is suggested to upgrade the affected component.

Пока лабрадоры молча тянут за поводок, машины пишут будущее….

A vulnerability has been found in Juniper Junos OS Evolved on PTX and classified as critical. The impacted element is an unknown function of the component evo-aftmand/evo-pfemand. This manipulation causes buffer overflow. This vulnerability is tracked as CVE-2025-59969. The attack is only possible within the local network. No exploit exists. The affected component should be upgraded.

A vulnerability, which was classified as problematic, was found in Juniper Junos OS and Junos OS Evolved up to 25.2R0/25.2R1. The affected element is an unknown function. The manipulation results in denial of service. This vulnerability is identified as CVE-2026-33797. The attack can only be performed from the local network. There is not any exploit available. You should upgrade the affected component.

A vulnerability, which was classified as critical, has been found in Juniper Junos OS up to 25.2R1-S2. Impacted is an unknown function. The manipulation leads to improper check for unusual conditions. This vulnerability is referenced as CVE-2026-33790. Remote exploitation of the attack is possible. No exploit is available. It is advisable to upgrade the affected component.

A vulnerability classified as critical was found in Juniper Junos OS up to 25.4R0. This issue affects some unknown processing. Executing a manipulation can lead to symlink following. The identification of this vulnerability is CVE-2026-21916. The attack can only be executed locally. There is no exploit available. Upgrading the affected component is advised.

A vulnerability classified as problematic has been found in OpenClaw up to 2026.3.24. This vulnerability affects unknown code of the component JSON Parser. Performing a manipulation results in incorrect behavior order. This vulnerability was named CVE-2026-35640. The attack may be initiated remotely. There is no available exploit. It is recommended to upgrade the affected component.

A vulnerability described as problematic has been identified in Juniper Junos OS and Junos OS Evolved. This affects an unknown part of the component Layer 2 Address Learning Daemon. Such manipulation leads to memory leak. This vulnerability is uniquely identified as CVE-2026-33780. The attack can only be initiated within the local network. No exploit exists. Upgrading the affected component is recommended.

好，我现在要帮用户总结这篇文章的内容。用户的要求是用中文，控制在100字以内，不需要特定的开头，直接写描述。首先，我需要仔细阅读原文，理解主要信息。 文章讲的是Instagram实施了一个新功能，允许用户在发布评论后的15分钟内进行编辑。之前虽然帖子可以编辑，但评论一直不能修改拼写错误。现在用户可以通过点击评论后的“编辑”选项来修改，修改后的评论会显示“已编辑”的灰色标签，但无法查看原始内容。 接下来，我需要将这些信息浓缩到100字以内。要确保包含关键点：Instagram新增评论编辑功能、15分钟的时间限制、编辑按钮的位置、已编辑标签的显示以及无法查看原评论的事实。 可能的结构是先说明功能新增，然后时间限制和操作方式，最后结果和限制。这样既全面又简洁。 现在开始组织语言：“Instagram新增评论编辑功能，用户可在发布后15分钟内修改内容。点击评论旁的‘编辑’按钮即可操作。修改后的评论将标注‘已编辑’标签，但无法查看原始内容。” 检查一下字数是否在限制内，并确保没有遗漏重要信息。确认无误后就可以给出这个总结了。 Instagram新增评论编辑功能，用户可在发布后15分钟内修改内容。点击评论旁的“编辑”按钮即可操作。修改后的评论将标注“已编辑”标签，但无法查看原始内容。

A vulnerability marked as problematic has been reported in Juniper Junos OS up to 25.2R1-S2 on SRX. Affected by this issue is some unknown functionality of the component Server Certificate Parser. This manipulation causes improper following of a certificate's chain of trust. This vulnerability is handled as CVE-2026-33779. The attack can be initiated remotely. There is not any exploit available. It is suggested to upgrade the affected component.

A vulnerability labeled as problematic has been found in Juniper Junos OS up to 25.2R1 on MX. Affected by this vulnerability is an unknown functionality of the component Log Message Handler. The manipulation of the argument bbesmgd[] results in memory leak. This vulnerability is known as CVE-2026-33775. It is possible to launch the attack remotely. No exploit is available. The affected component should be upgraded.

Instant messaging has been around for decades, but it became widely adopted with the emergence of smartphones. Earlier, communication was limited to basic text messages. Messaging expanded to include photos, videos, and video calls without relying on telecom networks, as long as there is a reliable data connection. Privacy and metadata concerns With the growth of communication, privacy and security concerns became more prominent. Companies responded by encrypting message content to protect user data. End-to-end … More →

The post Product showcase: Session, a messenger without phone numbers or metadata appeared first on Help Net Security.

A vulnerability identified as critical has been detected in Juniper Junos OS and Junos OS Evolved. Affected is an unknown function of the component Management Daemon. The manipulation leads to incorrect synchronization. This vulnerability is traded as CVE-2026-21919. It is possible to initiate the attack remotely. There is no exploit available. You should upgrade the affected component.

A vulnerability categorized as critical has been discovered in Juniper Junos OS and Junos OS Evolved. This impacts an unknown function of the component User Interface. Executing a manipulation can lead to execution with unnecessary privileges. This vulnerability appears as CVE-2026-33793. The attack requires local access. There is no available exploit. It is advisable to upgrade the affected component.

A vulnerability was found in Samsung Electronics MagicINFO 9 Server 21.1091.1. It has been rated as critical. This affects an unknown function. Performing a manipulation results in incorrect default permissions. This vulnerability is reported as CVE-2026-25203. The attack requires a local approach. No exploit exists.