VulDB Recent Entries

A vulnerability was found in UTT 进取 518G up to V3v3.2.7-210919-161313. It has been classified as critical. This vulnerability affects the function sub_4247AC of the file /goform/formRemoteControl. The manipulation of the argument Profile leads to buffer overflow. This vulnerability is uniquely identified as CVE-2025-11651. The attack is possible to be carried out remotely. Moreover, an exploit is present. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in HCL Unica up to 12.1.10 and classified as problematic. This affects an unknown part. Executing manipulation can lead to exposure of sensitive system information to an unauthorized control sphere. This vulnerability is handled as CVE-2025-52616. The attack can be executed remotely. There is not any exploit available.

A vulnerability has been found in HCL Unica Centralized Offer Management up to 25.1 and classified as critical. Affected by this issue is some unknown functionality. Performing manipulation results in server-side request forgery. This vulnerability is known as CVE-2025-31993. Remote exploitation of the attack is possible. No exploit is available.

A vulnerability, which was classified as problematic, was found in HCL MaxAI Assistant. Affected by this vulnerability is an unknown functionality of the component Special Character Handler. Such manipulation leads to basic cross site scripting. This vulnerability is traded as CVE-2025-31992. The attack may be launched remotely. There is no exploit available.

A vulnerability, which was classified as problematic, has been found in HCL Unica Centralized Offer Management up to 25.1. Affected is an unknown function. This manipulation causes authorization bypass. This vulnerability appears as CVE-2025-31997. The attack may be initiated remotely. There is no available exploit.

A vulnerability classified as problematic was found in HCL Unica Centralized Offer Management up to 25.1. This impacts an unknown function. The manipulation results in improper check or handling of exceptional conditions. This vulnerability is reported as CVE-2025-31998. The attack can be launched remotely. No exploit exists.

A vulnerability classified as critical has been found in Oracle Configurator up to 12.2.14. This affects an unknown function of the component Runtime UI. The manipulation leads to improper authorization. This vulnerability is documented as CVE-2025-61884. The attack can be initiated remotely. There is not any exploit available. It is recommended to upgrade the affected component.

A vulnerability described as problematic has been identified in Tomofun Furbo 360 and Furbo Mini. The impacted element is an unknown function of the file /etc/shadow of the component Password Handler. Executing manipulation can lead to use of weak hash. This vulnerability is registered as CVE-2025-11650. The physical device can be targeted for the attack. Furthermore, an exploit is available. The firmware versions determined to be affected are Furbo 360 up to FB0035_FW_036 and Furbo Mini up to MC0020_FW_074. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability marked as critical has been reported in Tomofun Furbo 360 and Furbo Mini. The affected element is an unknown function of the component Root Account Handler. Performing manipulation results in use of hard-coded password. This vulnerability is cataloged as CVE-2025-11649. The attack must be initiated from a local position. Furthermore, there is an exploit available. The firmware versions determined to be affected are Furbo 360 up to FB0035_FW_036 and Furbo Mini up to MC0020_FW_074. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability labeled as critical has been found in Tomofun Furbo 360 and Furbo Mini. Impacted is an unknown function of the file TF_FQDN.json of the component GATT Interface URL Handler. Such manipulation leads to server-side request forgery. This vulnerability is listed as CVE-2025-11648. The attack may be performed from remote. In addition, an exploit is available. The firmware versions determined to be affected are Furbo 360 up to FB0035_FW_036 and Furbo Mini up to MC0020_FW_074. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability identified as problematic has been detected in Tomofun Furbo 360 and Furbo Mini. This issue affects some unknown processing of the component GATT Service. This manipulation of the argument DeviceToken causes information disclosure. This vulnerability is tracked as CVE-2025-11647. The attack is only possible within the local network. Moreover, an exploit is present. The firmware versions determined to be affected are Furbo 360 up to FB0035_FW_036 and Furbo Mini up to MC0020_FW_074. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability categorized as critical has been discovered in Tomofun Furbo 360 and Furbo Mini. This vulnerability affects unknown code of the component GATT Service. The manipulation results in improper access controls. This vulnerability is identified as CVE-2025-11646. The attack can only be performed from the local network. Additionally, an exploit exists. The firmware versions determined to be affected are Furbo 360 up to FB0035_FW_036 and Furbo Mini up to MC0020_FW_074. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Tomofun Furbo Mobile App up to 7.57.0a on Android. It has been rated as problematic. This affects an unknown part of the component Authentication Token Handler. The manipulation leads to insecure storage of sensitive information. This vulnerability is referenced as CVE-2025-11645. It is possible to launch the attack on the physical device. Furthermore, an exploit is available. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Tomofun Furbo 360 and Furbo Mini. It has been declared as problematic. Affected by this issue is some unknown functionality of the component UART Interface. Executing manipulation can lead to insecure storage of sensitive information. The identification of this vulnerability is CVE-2025-11644. The physical device can be targeted for the attack. Furthermore, there is an exploit available. The firmware versions determined to be affected are Furbo 360 up to FB0035_FW_036 and Furbo Mini up to MC0020_FW_074. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Tomofun Furbo 360 and Furbo Mini. It has been classified as problematic. Affected by this vulnerability is an unknown functionality of the file /squashfs-root/furbo_img of the component MQTT Client Certificate. Performing manipulation results in hard-coded credentials. This vulnerability was named CVE-2025-11643. The attack may be initiated remotely. There is no available exploit. The firmware versions determined to be affected are Furbo 360 up to FB0035_FW_036 and Furbo Mini up to MC0020_FW_074. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Tomofun Furbo 360 and Furbo Mini and classified as problematic. Affected is an unknown function of the component Registration Handler. Such manipulation leads to denial of service. This vulnerability is uniquely identified as CVE-2025-11642. The attack can be executed directly on the physical device. No exploit exists. The firmware versions determined to be affected are Furbo 360 up to FB0035_FW_036 and Furbo Mini up to MC0020_FW_074. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in Tomofun Furbo 360 and Furbo Mini and classified as problematic. This impacts an unknown function of the component Trial Restriction Handler. This manipulation causes improper access controls. This vulnerability is handled as CVE-2025-11641. It is feasible to perform the attack on the physical device. There is not any exploit available. The firmware versions determined to be affected are Furbo 360 up to FB0035_FW_036 and Furbo Mini up to MC0020_FW_074. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as problematic, was found in Tomofun Furbo 360 and Furbo Mini. This affects an unknown function of the component Bluetooth Low Energy. The manipulation results in cleartext transmission of sensitive information. This vulnerability is known as CVE-2025-11640. Access to the local network is required for this attack. No exploit is available. The firmware versions determined to be affected are Furbo 360 up to FB0035_FW_036 and Furbo Mini up to MC0020_FW_074. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as problematic, has been found in Tomofun Furbo 360 and Furbo Mini. The impacted element is an unknown function of the file collect_logs.sh of the component Debug Log S3 Bucket Handler. The manipulation leads to insecure storage of sensitive information. This vulnerability is traded as CVE-2025-11639. An attack has to be approached locally. There is no exploit available. The firmware versions determined to be affected are Furbo 360 up to FB0035_FW_036 and Furbo Mini up to MC0020_FW_074. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as problematic was found in Tomofun Furbo 360 and Furbo Mini. The affected element is an unknown function of the component Bluetooth Handler. Executing manipulation can lead to denial of service. This vulnerability appears as CVE-2025-11638. The attacker needs to be present on the local network. There is no available exploit. The firmware versions determined to be affected are Furbo 360 up to FB0035_FW_036 and Furbo Mini up to MC0020_FW_074. The vendor was contacted early about this disclosure but did not respond in any way.